Product Details

NA 

• • The PIR Sensor On The Product Has A Moving Lens (mechanical Adjustment) And A Shade Ring Allow Users To Easily Customize The Coverage Area And Detection Range.
  • RGB LED Can Be Used To Indicate Movements Or/and One Of The Measurements Value.
  • Mixed Light Measurement Suitable For Fluorescent (FUPUESL), Halogen/incandescent Lamps And LEDs.
  • KNX Programming Button Of The Product Is Under The Front Cover For Easy Access.
  • Product Can Be Flush Mounted Installed In Ceilings With Clamps.
  • Ceiling Installation Is Also Possible With Surface-mounted Box.
  • 8 Independent Channels Can Be Used For Presence Or/and Brightness Dependent Control For Lighting, HVAC Control Etc...
  • Test Mode For Checking Function And Detection Area
  • All Sensors Measurements Can Be Calibrated Before ETS Programming By Parameters Or After ETS Programming By Communication Objects.
  • Alarm Function For Measurements
  • Presence Dependent Channels Can Work In Parallel (Master/ Slave Or Master/Master)
  • Short Presence Function Reduces The Time Delay When Device Detects Movement Briefly
  • Brightness Switching Value Or Set Point Value Can Be Set In Lux Before ETS Programming By Parameters Or After ETS Programming By Communication Objects
  • Channel’s Presence And Brightness Sources Can Be From Internal Or/and External Sensors
  • Independent Lock Function For Each Channel
  • Channels Can Be Programmed To Work With Manual Switching/dimming (by Push Buttons For Example).
  • Participation To Scenes